LEARN STM32F3DISCOVERY DEEP DIVE - Expanded Project Guides
Generated from:
LEARN_STM32F3DISCOVERY_DEEP_DIVE.mdThis folder contains deep-dive guides for each project in the learning path.
Overview
These guides expand each project into a full learning guide with theory, architecture, implementation phases, testing, and extensions.
Project Index
| # | Project | Difficulty | Time | Key Focus |
|---|---|---|---|---|
| 1 | Board Bring-Up and Clock Audit | Level 1: Beginner | 1-2 weeks | Boot + Clocking |
| 2 | GPIO Map and Alternate-Function Explorer | Level 1: Beginner | 1-2 weeks | GPIO / Pin Multiplexing |
| 3 | Timer-Driven LED Sequencer | Level 2: Intermediate | 1-2 weeks | Timers / Scheduling |
| 4 | PWM Motor or LED Brightness Controller | Level 2: Intermediate | 1-2 weeks | Timers / PWM |
| 5 | ADC Sensor Sampler + Logging | Level 2: Intermediate | 1-2 weeks | ADC / Sampling |
| 6 | DAC Waveform Generator | Level 2: Intermediate | 1-2 weeks | DAC / Signal Generation |
| 7 | Interrupt Latency Profiler | Level 3: Advanced | 1-2 weeks | Interrupts / Latency |
| 8 | DMA-Based ADC Ring Buffer | Level 3: Advanced | 1-2 weeks | DMA / Data Streaming |
| 9 | I2C Sensor Driver and Calibration Log | Level 2: Intermediate | 1-2 weeks | I2C / Sensor Integration |
| 10 | SPI Display or LED Matrix Driver | Level 2: Intermediate | 1-2 weeks | SPI / Display Control |
| 11 | Quadrature Encoder Reader | Level 3: Advanced | 1-2 weeks | Timers / Input Capture |
| 12 | UART Command Console + Boot Diagnostics | Level 2: Intermediate | 1-2 weeks | UART / Diagnostics |
| 13 | Power Mode Explorer | Level 3: Advanced | 1-2 weeks | Power / Low-Power Modes |
| 14 | Fault Injection and Watchdog Recovery | Level 3: Advanced | 1-2 weeks | Reliability / Watchdogs |
| 15 | On-Board Sensor Fusion Dashboard | Level 3: Advanced | 1-2 weeks | Sensors / Data Fusion |
Prerequisites
- Basic programming and system fundamentals
- Comfort with command line tooling